Warn Power Plant HP 9500

Warn Power Plant HP 9500


New and improved winch/air compressor now offers increased performance and reliability.
The new WARN PowerPlant 9.5 combines a powerful winch with a high-performance air compressor for the ultimate vehicle-mounted multi tool. The PowerPlant 9.5 has a pulling capacity of 9,500 lbs. and is equipped with a powerful air compressor that can air up four 35″ tires in eight minutes and even run air tools. With new additions such as stainless steel fasteners, a new pressure switch, a revised contactor, and a new hose and accessories, the PowerPlant is better than ever.

Series-wound motor with thermal protection shutoff switch.
Three-stage planetary gear train for smooth, efficient operation.
Extreme duty winch sealing for superior water resistance.
Stainless steel fasteners for exceptional corrosion protection.
Wire rope with roller fairlead (125′ of 5/16″).
Mechanical brake for reliable operator control while winching.
Improved contactor control for great reliability and long duty cycles.
Pressure switch limits maximum/minimum air pressure in reservoir.
Intercooler/air reservoir reduces compressed air temperature. Half-gallon air reservoir helps even airflow.
High-output air compressor delivers 5 CFM @ 90 PSI; maximum air pressure is 100 PSI.
Air outlet/hose connection works with quick-connect couplers.
Hand-held control for operation of both winch and compressor. LED provides feedback on motor temperature.
Accessory kit includes new, more durable and flexible 20′ (6.1m) air hose; quick-connect couplers; WARN-branded tire pressure gauge and dual air chuck; and sturdy carry bag.
New corrosion-resistant flat-black finish.
Model: PowerPlant 9.5
Part Number: 91800
Rated line pull: 9,500 Lbs., (4310 kg)
Motor: Series-wound 4.6 hp 12V, with thermal protection shutoff switch
Electrical controls: Contactor
Remote control: Remote switch with thermometric LED and 12′ (3.7m) lead
Gear train: 3-stage planetary
Gear ratio: 156:1
Clutch (freespooling): Sliding ring gear
Brake: Automatic mechanical cone brake
Wire rope: 125′ of 5/16″ (38m of 8mm diam.)
Fairlead: Roller
Recommended battery: 650 CCA minimum
Battery leads: 2 gauge, 72″ (1.83m)
Finish: Flat black powdercoat
Drum diameter/Length: 2.5″/9″ (6.4cm/23cm)
Weight: 100 Lbs. (45 kg)
Air Reservoir: 1/2 gallon with Integrated Air Intercooler
High Air Flow Rating: 12 CFM @ 0 psi, 5 CFM @ 90 psi
Max Air Pressure: 100 psi
Air Pressure Switch: Yes
Air Hose: 20′, with quick-disconnect. Brass air fittings and couplings

CÓDIGO: WA-0048.